Garden & Plant Care

Ready-to-use mixture of neem oil and rimulgan for immediate use. Neem oil is a high-quality vegetable oil that is extracted from the seeds of the neem tree in a gentle cold-pressing process. Its many positive properties make it so valuable for garden, household and people. Neem oil helps plants to regain their natural balance and gives the leaves a healthy sheen. In the ready-to-use mixture, the neem oil is already formulated with the emulsifier "Rimulgan". Rimulgan consists of castor oil and is easily biodegradable. The preparation of a neem oil spray is particularly easy with the mixture offered here: Mix it with water in the recommended ratio and start using it! Dosage for 1 litre of water: For soft-leaved plants (cucumbers and other vegetables):5 ml (g) neem oil-emulsifier mixture For hard-leaved plants (roses, fruit trees and shrubs, many indoor plants):10 ml (g) neem oil-emulsifier mixture

Neem press cake is dehulled and deoiled neem seed. Mixed with soil or worked into the soil, it can be absorbed by many plants through the roots and helps them to regain their natural balance. In addition, neem press cake inhibits nitrogen leaching in the soil and thus contributes positively to the nutrient supply of the plants. A water extract can also be produced. Neem press cake is approved for organic farming! The product has been included in the "Betriebsmittelliste für den ökologischen Landbau in Deutschland" (List of inputs for organic farming in Germany) and the "FiBL List of organic processing". www.biologischgaertnern.de As a soil additive you need: For sowings and seedlings:10 g per kg of soil For old plantings:up to 50 g per kg of soil For water extract:30 g per litre of water

Neem seeds are the most important raw material of the Indian neem tree, Azadirachta indica. When crushed, they are easily used as a sprinkling powder or to obtain water extracts.

Soothing care for stressed and dry hands! When gardening, your hands are exposed to a lot of wear and tear: When planting and repotting, but also when harvesting carrots, potatoes, etc., your hands inevitably come into contact with soil and this draws a great deal of moisture from the skin. But also when cutting bushes and trees, the inner skin of the hands is irritated by the permanent punctual strain. And branches and thorns often leave their mark on the backs of the hands as well. Working with gloves can sometimes help here - but let's be honest: gardening with sweaty hands is only half as much fun and as soon as you work with a shovel, hoe or secateurs, gloves always rub somewhere. We have developed our Hand Cream for Gardeners especially for the needs of battered hands: It provides your skin with moisture and moisturising oils, such as almond oil and shea butter, after the work is done. The contained rivet extracts also have an antibacterial and anti-inflammatory effect. The cream is absorbed pleasantly quickly and pampers you with a lemony scent. It is free from parabens and mineral oil products. Vegan and not tested on animals! The hand cream (not only) for gardeners! Ingredients according to INCI: Aqua, Alcohol denat, Prunus Amygdalus Dulcis Oil, Butyrospermum Parkii Butter, Glycerin, Glyceryl Stearate, Glyceryl Stearate Citrate, Caprylic/Capric Triglyceride, Cetyl Alcohol, Sorbitol, Sodium Levulinate, Xanthan Gum, Glyceryl Caprylate, Limonene, Melia Azadirachta Leaf Extract, Sodium Anisate, Tocopherol, Lactic Acid, Bisabolol, Lavandula Hybrida Oil, Phytic Acid, Citronellol, Linalool, Geraniol, Pelargonium Graveolens Oil, Citrus Aurantium Dulcis Peel Oil, Isoeugenol, Citral, Eugenol.

Neem oil is a high-quality vegetable oil that is extracted from the seeds of the neem tree in a gentle cold-pressing process. Its many positive properties make it highly valuable for gardens, households and people. Neem oil helps plants regain their natural balance and gives the leaves a healthy sheen. Please note: As oils can basically only be mixed with water with an emulsifier, you will inevitably need an emulsifier to make a spray! The ideal emulsifier is the environmentally friendly "Rimulgan", which is specially formulated for neem oil. The components must be mixed with a ratio of 4 parts of Neem oil and 1 part of Rimulgan.We also offer a ready-made mixture of neem oil and rimulgan. You can find it here. The preparation of a neem oil spray is simple and easy to use. Since the neem oil solidifies at temperatures below 20 degrees, we recommend using lukewarm water. The neem oil is used very sparingly and dissolved in water with the help of an emulsifier.  Neem oil spray is an ideal adhesive for "sodium hydrogen carbonate" and "liverwort extract". Due to the better adhesion, the plant strengthening agents remain effective for longer.

Sodium hydrogen carbonate is a salt from the food industry and therefore completely harmless to humans, animals and the environment. It is a ubiquitous raw material widely used in food, food industry, medical and hygiene products. See more about its many applications in the "Raw material info" section under NaHCO3. TIP! For better adhesion to plants we recommend the application together with neem oil & neem oil emulsifier "Rimulgan". Due to the better adhesion, the sodium hydrogen carbonate remains effective longer. You get all three products together in our practical Neem Combipack (>> to the product)! Dosage for 1 litre of water: For soft-leaved plants (cucumbers and other vegetables):2.5 ml (g) sodium hydrogen carbonate For hard-leaved plants (roses, fruit trees and shrubs, many houseplants):10 ml (g) sodium hydrogen carbonate

Rimulgan is needed as an emulsifier to make neem oil soluble in water. It is therefore absolutely necessary for the preparation of a Neem oil spray mixture. The components must be mixed with a ratio of 4 parts of Neem oil and 1 part of Rimulgan. For easier application, we also offer neem oil & rimulgan as a ready-to-use mixture. Dosage for 1 litre of water: For soft-leaved plants (cucumbers and other vegetables):5 ml (g) neem oil-emulsifier mixture For hard-leaved plants (roses, fruit trees and shrubs, many indoor plants):10 ml (g) neem oil emulsifier mixture

After harvesting, neem leaves are air-dried, cut, portioned and vacuum-packed. They are used as a base for the production of tinctures and as an additive in the manufacture of cosmetics and body care products, such as soaps, shampoos, dental care products and body lotions. Neem leaves are traditionally used in food storage protection and to repel textile moths, for example in the neem lavender sachets.

Ferramol Schneckenkorn is used against slugs in the bedding of all types of vegetables, fruit and ornamental plants. The active ingredient is iron III phosphate. This is an iron compound that also exists naturally. The product is rainproof and, thanks to a special mechanism of action, the slugs do not slime out after eating the slug pellets, nor are slug remains visible. After the slugs have eaten slug pellets, they crawl into their underground hiding places and cause no further damage to the plants. Ferramol slug pellets are non-toxic to pets and, when used properly, are gentle on beneficial insects such as hedgehogs, earthworms and bees. The magazine Ökotest awarded Ferramol Schneckenkorn the rating "very good" in the 05/2009 issue. Application: Spread Ferramol Slug Pellets over a wide area of 5 g/m² (corresponds to approx. one heaped teaspoon) in bedding areas endangered by slugs. In areas where the bait has been devoured, re-spread it. (Detailed instructions for use can be found on the back of the pack). Active ingredient: 9.9 g/kg ferric phosphate. Use pesticides with care. Always read the label and product information before use.

ChiProPlant ® is a Chitosan-based natural product, supporting plant resistance against pathogenic fungi and bacteria. It promotes healthy soil life, improves vitality and yield of plants and supports plant growth through its strong elicitor effect. The compound is made from crab shells and represents environmentally-friendly plant care by helping reduce chemical pest management. ChitoPlant® increases yield, germination rate, growth and sturdiness of treated plants and has positive effects on symbiotic mycorrhiza. Furthermore, it has proven effects in supporting plants against abiotic stress factors such as extreme weather conditions -- for example, drought. ChiProPlant® is water-soluble and can be applied with normal spraying equipment and it is suitable for all plants, soils and seeds outside or under glass. The strong prophylaxis against infestations one hand and enhanced plant growth of your healthy plant on the other will show in your yield and/or the beauty of your plants. ChiProPlant® chitosanhydrochlorid is listed as a basic substance in theEuropean Union (EU No.1107/2009). ChiProPlant is very productive: depending on the application, 2.5 - 5 g are sufficient for 10 litres of irrigation water! A detailed description with exact dosage information is enclosed with the product.

Vinegar is a mixture of water and acetic acid, an organic acid that occurs widely in nature. Acetic acid is formed through the natural decomposition and metabolic processes of acetic acid bacteria, which ferment alcohol into acetic acid and water. Today, the majority of vinegar is still obtained from high-proof alcohol, usually brandy. A distinction is made between vinegars depending on their origin, e.g. wine vinegar made from grapes, apple vinegar made from cider, whereby these natural vinegars made from fruit contain valuable accompanying substances such as vitamins, minerals, sugar and others. These natural vinegars are mainly used in the kitchen for nutrition, depending on flavour and preparation. Industrially produced vinegar essence is used in the garden for weed control or in the household as a cleaning agent and for a variety of other applications. This is then adjusted to the desired acidity to achieve the ideal effect.The natural table vinegars have an acidity of approx. 5% and a pH value of approx. 2.5. For household or garden applications, an acidity of 10% to 15% with a pH value between 2.0 and 2.3 is ideal. Vinegar or acetic acid is easily biodegradable up to this level and does not accumulate in nature. These acidity levels and the low pH value are the main reason for the germicidal effect of vinegar, as very few microorganisms can survive in such an acidic environment. This is how most types of bacteria and fungi are controlled, as well as many viruses. The higher the acetic acid content, the lower the pH value and the longer the exposure time, the stronger the antimicrobial and antiviral effect of the vinegar. Vinegar can easily replace countless cleaning agents, care products and other drugstore products. It is cheaper and also more environmentally friendly. Many advanced civilisations used vinegar as a natural remedy several thousand years ago. Vinegar has an anti-inflammatory, antibacterial and antipyretic effect and has a positive influence on the acid-base balance in the body. Not forgetting its many uses in the kitchen for preparing salad dressings, stews and other dishes, as well as for pickling and thus preserving vegetables. Vinegar has been authorised as a basic substance for use for plant protection purposes since 2019 (Implementing Regulation EU No. 2019/149). It is used as a herbicide to control weeds. A second treatment is permitted if the weeds resprout. Discover the variety of uses for vinegar. There is certainly a whole range of applications that will bring you relief and solutions in the daily course of things.

ALGAE is a natural algae extract and is suitable for all cultivated and ornamental plants. It promotes root growth and fruit formation as well as the development of shoots, sprouts and leaves. The quality of the fruit is improved. When applied to the soil and roots, the biological and physiological properties of the soil are promoted. Its naturally occurring substances are readily available and have a high biological activity. The product is readily biodegradable and non-toxic to humans, animals and the environment. Ingredients Natural extract from the marine algae Sargassum, Laminaria and Ascophyllum nodosum. ALGAE contains amino acids and vitamins, as well as the nutrients N, P, K, Mg, Na, B, Cu, Fe, Mn, Mo, Zn in a balanced form. Organic components: ≥90 g/ L. Application & dosage Foliar applications Aqueous spray solutions of 0.1 to 0.15% (1.0 to 1.5 ml ALGAE per litre of water), 3 to 4 applications in the main vegetation period. Root and soil irrigation Apply 50 to 100 ml ALGAE per 100 m² area with plenty of water, 2-3 applications in the main vegetation period. Seeds, roots and seedlings Before planting, dip in an aqueous ALGAE solution of 0.1 to 0.15 % (1 ml to 1.5 ml per litre of water) and allow to soak in well. General information Spray early in the morning or late in the afternoon, do not apply in strong sunshine, strong winds or extreme temperatures. Storage conditions Store in a cool and dry place! Miscibility The products can be mixed with standard plant protection products and foliar fertilisers. ALGAE is a quality product from Nitrofarm, Greece.

Plant aid to increase the attractiveness of flowers for bees ATTRACT is applied during the flowering period of cultivated plants. It greatly increases the attractiveness of flowers for bees and other pollinating insects. The application leads to a greater acceptance and frequency of flower visits by these insects, a more efficient pollen transport and thus a better pollination of the plants. The result is a significant improvement in the quality of the fruit and a larger harvest. ATTRACT is recommended for use in agricultural crops such as oilseed rape, buckwheat, mustard as well as in horticulture, fruit growing and vegetable growing. Composition and mode of action: ATTRACT is a mixture of various natural compounds such as essential oils and natural plant nutrients. The product has been formulated using a special slow release technology - Slow Press Technology. This means that the substances are released gradually, which prevents rapid volatility of the active ingredients immediately after using the product. As a result, the effect of ATTRACT on bees extends over several months and lasts for almost the entire flowering period. The yield usually increases by 10-25 % after the use of ATTRACT. There is a non-negligible improvement in many plant quality parameters. Application & dosage: ATTRACT is sprayed as an aqueous solution between the start and full flowering. Thanks to the slow-release technology used, a single treatment is sufficient to achieve the desired effect. Fruit cultivation: 1 ml per 1 litre of water Field and vegetable cultivation: 250 ml ATTRACT in 250 litres of water per hectare Storage conditions: Store in a cool and dry place! ATTRACT is a quality product from Nitrofarm, Greece.